Saturday, September 21, 2019
Rates of reaction Essay Example for Free
Rates of reaction Essay Refer to: GRAPH 1 The basic trend of the graph shows that time of reaction (y) decreases at a decreasing rate. More specifically the curve of best fit shows that the average temperature (y) is inversely proportional to the average time of reaction (x). This forms an equation of y=mi (1/x) Time of reaction = constant x (1/temperature). As the constant is set as 1, this can be interpreted as y=1/x. In order to validate this I will produce a line graph showing the relationship between the two. The calculations of 1/temperature are also tabulated below. 2 As can be seen from the graph the time of reaction increases at a constant rate which proves that the time of reaction is proportional to 1 over temperature. Although the points do not form a perfect straight line, using the line of best fit it is possible to determine the time taken by any given temperature. For example a 1/temperature of 0. 015 i C would cause the reaction to take approx. 60 seconds. And by dividing 0. 015 by 1, it is possible determine the actual temperature of the reaction. In this case:à 1/temperature = 0. 015 1/0. 025 = 66. 66 Therefore temperature = 66i C Hence it would take approx. 60 seconds for a product to be formed when the temperature is 66i C. I have analysed the time of reaction as this was the dependant variable throughout my experiment, but the aim of my experiment is to determine the relationship between temperature and rate of reaction. Therefore I will begin by producing a scatter diagram showing all the recordings. This will allow me to observe the accuracy of results and also, through a visual display, identify any possible recordings that dont follow the usual trend. Using the recordings of time of reaction, it is possible to convert this into a rate using the following formula: 1 / time taken Below are the rates of reaction calculations tabulated and therefore a scatter diagram demonstrating this: The scatter diagram shows positive correlation meaning as the temperature increases, the rate of reaction also tends to increase. In order to distribute the recordings further and more importantly notify a relationship I will tabulate and produce a line graph showing the average time of reaction recordings against increasing temperature. TEMPERATURE (i C) The basic trend of the graph shows that as the temperature increases so does the rate of reaction, which proves my prediction is correct. However as can be seen, the relationship is not linear. The curve of best fit shows that the average rate of reaction (y) is directly proportional to the square root of temperature (x). I have calculated this below and in order to test a relationship I have produced a line graph: The graph shows that the average rate of reaction increases at a constant rate, excluding the second point, which proves that rate of reaction, is directly proportional to the square root of temperature. Using the line of best fit it is possible to find the rate of reaction by choosing any temperature on the graph. For example a Vtemperature of 3i C would cause the reaction to take approx. 0. 00565 seconds. And by squaring the VtemperaturAs the temperature increases the time of reaction decreases.à As the temperature increases the rate of reaction also increases which validates my prediction is correct. And from demonstrating these findings on line graphs, I was able to determine and prove that:à Time of reaction is proportional to 1/temperature andà rate of reaction is proportional to the square root of temperature. EVALUATION: Accuracy: As can be seen from the circled point on the majority of graphs produced from the results taken, this is identified as an anomaly as it disperses away from the usual trend of the graph. There are many reasons to indicate why an anomaly is present; this consists of human errors and equipment restrictions and possible unruly scientific theories that affect the whole experiment.à The method of using a stop watch to measure the time of reaction was not as reliable as to using more precise recording apparatus such as a time measuring and indicating device for example. This is 1) due to the unit of time where all recordings were automatically rounded to 2d. p. and 2) the mature condition of the stop watch used at times caused a lockage in the start and stop buttons, in a case where the time distinction of getting the stop watch to start and stop may have affected the accuracy of a recording.à Furthermore it was impossible to observe and acknowledge exactly when a reaction had been completed; hence product formation. Extra attention was paid to the reaction, however the stop watch timer was only stopped when I believed the reaction was complete. This is unreliable and has no form of justification as this was determined solely through manual procedure.à Again another profound error may have been the amount of hydrochloric acid. I ensured as much solution as possible was poured into the required beaker after being measured in the measuring cylinder, however there were always small drips of liquid that were inevitable. It is illegible whether this has an influential affect; however this regardless opposes the accuracy of the recordings. The temperature of the solution may have not been as intended at the start of the reaction (when the magnesium was put in). This is primarily due to that the beaker was removed from the heat once the thermometer hit the intended temperature, however the distinction in time of removing the beaker from the heating setup area to the flat desk and entering the magnesium may have caused the temperature to fall (significant/insignificantly is unknown). This is due to the reaction being exothermic, transfer of heat to surroundings, which would have caused dramatic changes in temperature throughout the experiment. There are also reasons to compliment the accuracy of my results:à Each recording was repeated twice. This enabled me to calculate an average and gave me the advantage of being able to produce a better analysis overall.à I was able to identify early on during the preliminary work that the magnesium strips may have not been the same consistent size throughout, but during the actual experiment I took extra care in measuring, cutting and comparing the strips to the required identical length. Reliability: In addition to the scopes of errors mentioned above, there are many other incontrollable factors that may have had a form of influence or obstruction. However no significant problems or difficulties were encountered whilst conducting the experiment. My results and conclusion were accurate and reliable enough to verify a relationship that as the temperature increases, the rate of reaction also increases, hence agreeing with my set prediction. I was also able to determine that an increase in temperature, decreases the time of reaction, furthermore the time of reaction is proportional to 1/temperature and the rate of reaction is proportional to the square root of temperature. Improvements: No matter how accurate produced results are, due to the restriction in apparatus provided and the time to complete the investigation, improvements will always be applicable. Possible improvements:à In order to exclude the scopes of errors mentioned above regarding changing temperature, it would be convenient to conduct reactions in a thermos or similar container which would trap the heat. This would keep the temperature constant and in return increase the accuracy of results. Even though two repeats for each recording was accurate enough to produce a reliable average, increasing this to three or four recordings would produce a range of results which could then be analysed in more detail. From this possible impediments of restrictions may also arise, which whilst analsying may bring about new theories affecting the reactions.à As mentioned earlier, a more precise time measuring device would be useful instead of a stop watch. This would obviously be to produce better, pri cised results and one that would possibly exclude the need of manual operation. Extending the investigation:à It would be useful to experiment temperatures below 30i C. This would enable me to observe the reactions and behavior of lower temperatures. And primarily with the last three temperature recordings it was noticeable that the points were closer which explains the flat curve produced at the end of graphs that produced a curve. This would enable me to observe the point at which reactions are unable to exceed; therefore it would be of use to observe temperatures exceeding 90i. Another method of measurement would be counting the bubbles formed in a reaction. This would require the need of better equipment, but I believe this would form interesting results.à It would also be interesting to experiment the influences of the other variables, as mentioned at the beginning of my coursework. I was able to briefly experiment concentration in my preliminary work, but it would be interesting to do a continuous specialised experiment and also a new variable that comes to mind: light. SECONDARY SOURCES OF INFORMATION: Internet sources used to construct my background knowledge:à http://www. wpbschoolhouse. btinternet. co. uk/page03/3_31rates. htmà http://www. scool. co. uk/topic_quicklearn. asp? loc=qltopic_id=11quicklearn_id=1subject_id=21ebt=248ebn=ebs=ebl=elc=4à http://www. webchem. net/notes/how_far/kinetics/rate_factors. htm.
Friday, September 20, 2019
Business Network Transformation
Business Network Transformation It is nearly impossible to imagine any company in this global economy that operates isolated and does not interact with suppliers, partners and vendors at some stage. This global ecosystem is remoulding relationships between companies in new and often uncomfortable ways. Companies are organizing collaborative partnerships globally to support their business operations locally. That extends their business value and gain competitive advantage. These enterprises are seeing beyond conventional business boundaries to lower costs, increase profit and improve quality of service they provide by tapping into applications, personnel, and infrastructure irrespective of where they reside. So, companies are looking to gain competitive advantage by leveraging these novel opportunities arose from intercompany interactions. Though Business Network Transformation is not a new concept, this idea had been kept apart from action due to IT limitations. Companies traditionally focused on customers, internal processes and cost cutting to differentiate their business in this ecosystem. But IT has changed this perception recently. Enhanced IT capabilities for communication, collaboration and information sharing caused increasing global competition. Companies realised a new way of doing business working together while working for others. Examining their value chains and understanding this competitive weapon resulted in formation of Business Networks. This paper contains the following topics; Business Network transformation explained with example How IT helps business networks and role of IT in business network transformation Service Oriented Architecture (SOA) explained with 3 success stories Relating Service Oriented Architecture to Enterprise Resource Planning packages Conclusion Business Network Transformation According to Philip Lay and Geoffrey Moore, Business Networks are groups of companies that work together toward a specific objective for mutual financial benefit. The example below helps to understand Business Network Transformation. Business network of Cellular Phone Company: Partners: Mobile handset makers, Chipset provider, Network switching manufacturer, Contract manufacturers, Wireless carriers, Routing Vendors, Application enablers, Service providers voicemail, email, mobile search, banking, video streaming etc., Advertisers banks, pharmaceuticals, CPG companies etc., Consumers mobile phone owners, dealers enterprises etc. Strategic Objective: A multi channel marketing strategy to transit from manufacturing handsets and equipment to a software service provider. Business process and IT implications: Demand data should be visible to ensure high level of retail stock through rapid supply chain response. This implies binding marketing programs and sell-out data to improve marketing return on investment. This example shows a company with collaborating partners in a business network and their strategic objective to transformation. As the definition of business networks has become known to everyone, the pace in which these networks are created and transformed and what IT resources are needed for this transition became a challenge. Role of IT in Business Network Transformation Potential to compete in this global market depends on businesss network of people and flexible processes. New technologies like Service Oriented Architecture (SOA) and Software as a Service (SaaS) enable these networks to amplify opportunities and flourish. Effective and efficient communication by sharing information across its ecosystem of suppliers, employees, customers and distributors is enabled by implementing such service oriented architecture and services. Utilising these capabilities, companies can provide improved customer experience due to improved intercompany interaction. These potentials also enable seamless interaction with intra company systems focusing on improving value chain. Taking full advantage of these global opportunities from business networks and becoming globally integrated enterprise demands high level of flexibility. Businesses need to merge newly acquired business potentials and technologies with legacy applications. Existing IT infrastructure must be adaptable to changes in business models and must be ready to accommodate them. Information is already being shared internally across departments within the business but now it has to be shared externally across business partners, across countries and continents. Business processes must be agile and consistent alignment between business and IT is critical. Service Oriented Architecture (SOA): Service oriented architecture (SOA) enables business organizations to achieve this agility needed to compete in global ecosystem. It divides the business into functional components that are easy to be drawn together quickly and economically. They are flexible enough to reuse in meaningful combinations to meet evolving business needs. These components are called Services. These combinations of services enable efficient collaboration and communication across company lines and unearth information buried within business processes. According to IBM, Service Oriented Architecture (SOA) is A business-centric IT architectural approach that supports integrating your business as linked, repeatable business tasks, or services. Service oriented architecture is essentially collection of services. These services are loosely coupled and implemented in standard ways. In other words, caller needs no knowledge of the technology or location of service provider. For example Create invoice as a service can be invoked by any other business unit or from any business application when invoice needs to be created. SAP defined Enterprise SOA as A blue print for an adaptable, flexible and open IT architecture for developing services-based, modular business solutions. Three features of an SOA: These three features provide value in a business by implementing SOA. Software reuse: Reusing components is one of the important advantages of SOA. Reusable components enable companies to avoid redundancy. For example a business has many functional silos and each silo usually needs information from other silo such as customer information or invoice. When these silos are using disparate technologies and are operating on different platforms, they need duplicate instances of this information in each silo. SOA creates single version of such services which can be shared across all functional silos. Composite applications: Composite applications are new cross-functional applications formed by combining functionality from many existing systems. For example, SOA enables companies to provide a single point access to a range of products through a self service portal for business partners. Usually this portal might be a combination of different processes with different technologies supported by IT services. Standard interface: Caller of a service does not need to have knowledge about services location or technology platform on which it was developed. Interface to services in SOA takes standard form. This facilitates a flexibility to run services where they are needed irrespective of location and technology with greater ease. It can also increase IT efficiency, improve quality of service and reduce costs. Coming to business partners, these loosely coupled, standard interfaced services provide extra benefits. Partner need not to be aware of progress of implementation of a service, as SOA provides transparency of location and technology. Standard interface enables partners to call a service having minimum information about the service. In essence, the below are the benefits fall into three business categories: Business Effectiveness: Business agility Greater speed in responsiveness to market Competitive advantage Improved business process efficiency Accuracy in deployment of resources according to business needs Cost factor: Maintenance costs are reduced Minimum skills and efforts needed for business change Optimized price due to choice of platform, technology and location Risk factor: Incremental deployment Enhanced IT quality Optimized payback times Enterprise Resource Planning and Service Oriented Architecture: A single system capable of accommodating business data which is centralised and accessible across all functional areas in the company was the basic concept of ERP. Before ERP era, data would flow across business units but not stored in one system. The single system was the selling point of all ERP vendors like SAP, IBM, Microsoft, Oracle etc. ERP implementation requires no service work to integrate smaller components but ERP implementation normally required greater customization. Without customization, ERP software packages seldom matched business processes and getting to the ready to work status. Though implementing ERP results many advantages, it has few drawbacks in terms of cost, customization and timeline for implementation. So ERP implementation and support are expensive and time consuming. It is also costly in the area of upgrading because it is tightly coupled package. The evolution of Service oriented architecture concept focused on these pitfalls of ERP. The Enterprise appl ication vendors used client server technology in 1990s and web client technology in 2000s. Now they are transiting to Service oriented architecture approach to ERP. This blend of ERP based on SOA is the best of breed approach facilitating customers to have more options to select services from any vendor. SOA can be said as father of modern IT architectures. Due to this combination, ERP components became services in Service oriented architecture. The below two are leading ERP vendors who recently released their ERP package based on SOA, SAP Enterprise SOA: SAP NetWeaver is the new product based on SOA. SAP NetWeaver is a platform on which other components such as Finances, Human Resource, Business Intelligence, Business process outsourcing etc are implemented. It boasts the advantages based on its SOA features such as web connections, Business network transformation etc. Oracle Oracle Fusion Middleware: Fusion Middleware is Oracles product based on SOA. It is a family of products seamlessly integrated to run agile business applications. Business Intelligence, User Interface, Content management, SOA Process Management etc. are components in this package. IBM Smart SOA: Smart SOA is a set of guiding principles derived from solidified best practices and documented projects. They have created entry points to each of their products such as Business Intelligence, BPM etc. These entry points are undertaking well defined, focused and individual project to meet individual business need. The role of SOA in Business Network Transformation can be easily understood from the success stories below. Ergon takes oil business to the web Ergon is United States based Petroleum Company. It is a privately owned company with 2,500 employees. It specializes in petroleum products with up and downstream operations like refineries, sales and final trucking. Business need: Ergon wanted to integrate internal processes to improve access to the information and to deliver that information to its customer. The company wanted to introduce self service portals and automated workflows to accelerate budget approval processes. Solution: Ergon has more than 50 operations within the business and each of which is a distinguished profit centre that reports back to the headquarters. They implemented SAP business workflow on existing SAP infrastructure to support purchasing and to automate approval of requisitions. Ergon also implemented IBM TotalsStorage DS6800 and changed its databases to IBM D2 facilitating upgrade their ERP to SAP ECC 6.0 in future. Benefits: Enterprise wide: SAP standardized their business processes. SAP enabled Ergons employees to gain consolidated view of individual workflow and to make better deals with their vendors. SAP ECC 6.0 based on SAP NetWeaver fetches more options for Ergon in the future. Portals enabled users to view core functionality tailored close to business needs. SAP NetWeaver created single enterprise platform. They could successfully align their business needs with their SAP ERP solution with greater flexibility and helping Ergons transition to SOA. Business flow: Ergon implemented SAP business workflow to support purchasing process as part of its ongoing enhancements to internal efficiency. SAP workflow tool accelerated approval of requisition process. This saved lot of administrative time by generating automated routing and emails. SAP business workflow reduced administrative workload and accelerated purchasing. After successful implementation of workflow tool and gained benefits from it, Ergon is now looking to extend this tool into other functional areas such as human resources. Storage Performance: Information access rates were improved and they saved 10-12 hours per weekend on database maintenance. This enabled freeing technical staff and to achieve better throughput for live users. They could increase the access up to 17 times faster than before. DS 6800 made reports and transactions through SAP applications run much more quickly. Storage performance is increased with new storage systems DS6800 and DB2 for business critical SAP systems. Stability: SAP and IBM worked together and IBMs DB2 is constantly supporting SAP applications. As performance and availability have become important aspects in extending SAP applications to more functional areas, this combination of SAP applications and IBM DB2 on IBM hardware using AIX operating system is helping Ergon to deliver excellent response times. Bezeq setup SOA: Bezeq is Israel based leading telecommunications provider. It is a privately owned company with 7,700 employees and with revenue of US $ 1 Billion. Its product and services range includes, domestic, international and cellular phone services, internet and data communication services. Business need: Bezeq wanted to maintain focus on new vision that is customer facing. In the highly competitive industry they wanted to keep their market shares regulated tightly. Field technicians needed equipment with mobile capabilities such as to prepare electronic bills, or customer receipts etc. They also planned to architect a reusable set of web services. Their objectives were to avoid constraints of location with handheld mobile devices and to provide application developers with a reusable set of services. Solution: Bezeq implemented SAP NetWeaver technology platform including exchange infrastructure, enterprise portal components and Web Dynpro development environment for mobile computing. Benefits: Enterprise wide: End to end business process integration was made possible by implementing SAP NetWeaver. This platform also enabled real time monitoring of field repair procedures. As NetWeaver is based on SOA, Bezeq was able to achieve improvements in processes surrounding service calls. Bezeq achieved speed in service completion from assignment to invoice. It has time to focus on streamlining its core telecommunications processes. Avoiding constraints of physical location: Field technicians are given PDAs to receive service calls through which they can order replenishments which also updates central inventory and customer records. They can use these PDAs from their homes and even while travelling. They can even get work related messages and use their cars as local and mobile warehouse for receiving and distributing parts to customers. Reusable services: For mobile computing, team has chosen Web Dynpro development environment. It is actually to program technician PDAs to access directly SAP NetWeaver portal component. Access to back end functionality that calls to the back end SAP system was encapsulated as reusable we services. Reduction in costs and risk in terms of both time and money is ensured by this use of encapsulated web services that is also flexible and reusable. Business model evaluation: Equipment and supplies are optimally allocated and managed using tools that technicians use. Company eliminated hour long scheduling session and consequently saved significant amount of money. They started saving 3, 250 hours a week. Bezeq has also reduced average response times to service requests from 6 days to 2 working days that should help increase customer satisfaction. Wipro Technologies helps its customers to make it quick Wipro Technologies is a division of Wipro Limited, the first global IT services organization to be certified in PCMM level 5 and SEI CMM level 5 and with annual revenue is US $4.3 Billion and 99,965 employees. They are one of the largest product engineering and support service providers globally. They have comprehensive research and development and provide IT solutions and services like systems integration, information systems outsourcing, software application development, package implementation and maintenance services. Business need: Wipro wanted to improve business process agility so as to improve customer experience for large automotive manufacturer in North America to increase competitive advantage. They also wanted to avoid difficulties involved in service level agreements in the areas of service contracts, monitoring agreements and track design times by deploying IT management tools. Wipro planned to increase security level in exposing IT services of the auto manufacturer. Solution: Wipro implemented Oracle products and services including Oracle Fusion Middleware, Oracle SOA suit including web services manager and BPEL process manager. They also implemented Oracle Enterprise manager an ERP solution that includes Tuning pack, Diagnostics pack, Management pack for SOA and Configuration management pack. Benefits: Enterprise wide: Oracles customer, the automotive manufacturer could roll out new services quickly and leveraged existing IT infrastructure and investments. They could successfully manage the implementation including services by various stakeholders, business units and vendors. Business to consumer portal enabled Wipros customer to access information online. They also gained the ability to analyse their IT infrastructure, capacity planning and service planning. Oracle SOA Suite: As customer deployed Oracle SOA suite, it enabled them to roll out new services in fast pace while leveraging existing IT investments. Business to consumer portal developed using this suite allowed automotive manufacturer to access information such as vehicle service alerts, campaign information, recall information and credit card reward points online. They also built a composite application enabled by SOA suite to aggregate account information gathered from disparate functional units in the business. Earlier, this application development used J2EE and took over one year and now with SOA suite it took 90 days. As part of SOA suite, Web services Manager assure Oracles customer to have the appropriate authorisation to access services. Oracle Enterprise Manager: This product from Oracle enabled its customer to proactively analyse IT infrastructure, service performance and capacity planning. As part of Enterprise Manager, Diagnostic pack enabled the automotive manufacturer to view problem areas in a single view. These success stories reveal how SOA enables businesses to gain competitive advantage by strengthening their business network and internal capabilities. Conclusion: In this commoditizing global economy it is critical to have the ability to operate effectively in business networks and to sustain competitive advantage. This ability to operate business effectively is made easy by Best of Breed IT solution (SOA and ERP) enabling businesses to excel at global scale. But the businesses have a challenge to come out of the shell to invest on these technologies to stand at the top in their niche markets. They also gain advantage of auditing their current infrastructure, business processes and integrate them to achieve single view.
Thursday, September 19, 2019
Stem Cells Essay -- Ethical Issues, Embryonic Stem Cells
Content 1. Introduction 2. The unique properties of stem cells and the ways of reception. 3. The application of stem cells in curing the worldwide diseases. i. The effectiveness of using stem cells in diabetes treatment and possible risks of this therapy. ii. What are the benefits and risks of using stem cells in curing cardiac disorders, such as ischemic disease and stroke? iii. How neural disorders, such as Parkinsonââ¬â¢s, Alzheimerââ¬â¢s and spinal cord injuries can be treated by stem cells and what are the fears about application of this therapy on human? 4. The issues connected with stem cells research. 5. Conclusion 6. Reference list 1. Introduction The world of science is developing very rapidly. This can be explained by the desire of people to know everything, e.g. the origins of life, the structure of humanââ¬â¢s organism, the secrets of universe etc. The one of a set of branches in science is regenerative medicine, which includes stem cells research. Generally, stem cells are unique cells in the humanââ¬â¢s body, which have an ability to renew themselves and become specialized into liver cells, kidney cells or spinal cord cells from unspecialized type of cells. There are several advantages and disadvantages of using stem cells in treatment the most common diseases of the world. The subject of this research project is to evaluate the benefits and risks of using stem cells in curing global diseases. It merits study, because stem cells are the constituent part of human organism and their abilities must be explored, in order to use them in therapies for diseases such as Alzheimerââ¬â¢s, Parkinsonââ¬â¢s, diabetes me llitus, spinal cord injuries and cardiac disorders. It is significant to know possible risks of using stem cells, as wel... ...w neural disorders, such as Parkinsonââ¬â¢s, Alzheimerââ¬â¢s and spinal cord injuries can be treated by stem cells and what are the fears about application of this therapy on human? The scientists are suggested that stem cells have a great potential in treatment the neurodegenerative disorders, such as Parkinsonââ¬â¢s, Alzheimerââ¬â¢s and spinal cord injuries, but at the same time these therapies have several risks, which can be explained by not enough investigations in this field and requires more time to do it. The Parkinsonââ¬â¢s disorder is a type of neurodegenerative diseases, which is characterized by death of special cells, which produce a chemical, called dopamine. Dopamine is responsible for humanââ¬â¢s movement, because it carries the signals to the brain. The loss of these cells can cause symptoms, such as tremors, rigidity and disability to move (Wu 2010).
Wednesday, September 18, 2019
Gonorrhea Essay -- essays research papers
Gonorrhea à à à à à Gonorrhea is a curable, bacterial, sexually transmitted disease caused by a bacterium called Neisseria gonorrhoeae (a member of the family Neisseriaceae). Bacteria are introduced during sexual contact. These bacteria can infect the genital tract, the mouth, and the rectum. It attacks the urethra in males, the cervix in females, and the throat. The majority of the organisms belonging to this family are non-pathogenic or commensals, however, gonorrhea is always pathogenic. à à à à à Gonorrheaââ¬â¢s mode of transmission is during sexual intercourse ââ¬â vaginal, oral, and anal. People who practice anal intercourse can get gonorrhea of the rectum. Even women who do not engage in anal intercourse can get gonorrhea of the rectum if the bacteria are spread from the vaginal area. à à à à à Because symptoms are not always present, you may be infected with gonorrhea and not know it. If present, symptoms appear within 2 to 14 days. Fifty percent of people with gonorrhea may show no symptoms. Men are more likely than women to show signs of infection. Gonorrhea in Men can cause painful urination, creamy or green pus-like penile discharge, and testicular pain. Gonorrhea in Women can cause vaginal discharge that are bloody or yellow, painful urination, bleeding between periods, excessive bleeding during menstrual period, painful intercourse, and lower abdominal pain. Symptoms of rectal infection include discharge, ...
Tuesday, September 17, 2019
Marie and Meursault: Meant to Be or Want to Be Essay
ââ¬Å"It occurred to me that anyway one more Sunday was over, that Mamam was buried now, that I was going back to work and that really, nothing had changed. â⬠(1. 1. 15) These are some of the words that ran through Meursaultââ¬â¢s mind after his motherââ¬â¢s death. He was very isolated from her so he felt as if nothing had changed. He was not the most outgoing person but the same cannot be said about his love interest, Marie. Throughout the novel, The Stranger, Meursault and Marie reveal just how many similarities and differences they share in the topics of emotion, actions and mannerism. To begin with, emotion was most certainly one of the main factors of the book. Emotion played such a big impact it potentially caused a death. Marie and Meursault very both similar and different in their ways of emotion. They were both very physically bonded to one another. They might not have always seen eye to eye, but when it came to contact, their emotions were hand in hand. Recently after Mamam lost her life, Meursault made a quick connection with Marie. ââ¬Å"Together again, Marie and I swan out a ways, and we felt a closeness as we moved in unison and were happy. (1. 6. 7) Just from a line of Meursaultââ¬â¢s thoughts, you could tell he had a serious emotional connection with Marie. For most of the novel, this couple seemed as they were formed together into one person, but on the other hand, their everyday feelings about common things were as different as black and white. Marie was a very energetic, romantic and passionate Mann 2 woman, while her other half rarely every showed any kind of emotion other than physically. Later on in, the Stranger, Marie asked Meursault if he loved her. By responding that it did not matter if he loved her, it put it right out in the open that he did not have a very wide emotion range. Meursault also never really showed any grief for the loss of his mother, especially while at her funeral. â⬠Soon one of the women started crying. à I thought sheââ¬â¢d never stop. à I wish I didnââ¬â¢t have to listen anymore. But I didnââ¬â¢t dare say anything. â⬠(1. 1. 16) The way Meursault expresses himself surely reveals just how there are many more differences than similarities when it comes to Marie and his emotions. In addition to emotion, Marie and Meursault have very similar and different actions. As obviously pointed out I the novel, the both enjoy having feeling relations with each other. The both are very good at controlling their actions in the majority of the story. For example, even when Meursault is awaiting execution he does not panic or freak out with the exception of trying to be forced to pray. The two adults are not completely the same in their actions though, they are also very different. Meursault does not stay low key all of the time, sometimes he just has to let it out. While at the beach with Marie, and his friends, they come across the Arab that cause trouble for Raymond. Instead of just going with the flow, Meursault goes and takes charge of the situation. It may not have been his smartest action considering it took away someoneââ¬â¢s life; it was a very different way to stand up for something. Meursault clearly had a great deal more of bravery than his girlfriend, Marie. Mann 3 Lastly, the similarities and differences between Marie and Meursault were also influenced by mannerism. Meursault and Marie made very clear throughout their time together that they had a different way of doing things than we do now. In their relationship, they did not take things as slowly as we do now-a-days. Considering they were very close together just on the first day of seeing one another in a great deal of time, you can tell they are not the type of people to kiss and hide. Individually, the two people had extremely different ways of doing things. Meursault was not the type of person to hide in the back while everyone else fought the war. Meursault was the make it happen kind of man. When he took the matters of the Arab into his own hands, it completely spiraled out of control, but still, he took a step forward, not back. Very differently from her mate, Marie was the gal that would wait for someone else to take the first step. Either or, Meursault and Marie had some similarities alongside their differences in mannerism. In conclusion, Marie and Meursault showed many similarities and differences in mannerism, action and emotion. This statement was easily expressed by Meursaultââ¬â¢s mind thinking, ââ¬Å"It occurs to me that anyway, one more Sunday, was over, Mamam was buried now, that I was going back to work, and that nothing had really changed. ââ¬
Monday, September 16, 2019
Grade 10 History Notes Essay
The Canadians had to take over the ridge which was located on the Douai plain, in France, and was in control by the Germans * To take over the ride it was split into 5 parts| * This was the high point of Canadian military * The use of ââ¬Å"creeping barrageâ⬠allowed the ridge to be taken over quickly * The battle was short * Years later they made a memorial to commemorate the 11,000+ soldiers who died at Vimy ridge. | The Halifax Explosion| * This took place when two ships that had explosive materials aboard, they collided while pulling out of the port * This explosion ruined about 1. km of land mass| * Left many Canadians dead or blind * Damaged the economy * Later months when the war ended, the port was not ready to take ships which was also a factor that delayed the soldiers from returning| Life in the Trenches| * Horrible, the trenches were filled with rats and lice * Soldiers were always cold, soaking wet, and hungry * Trenches were uneven and intricate| * Soldiers were r eally messed up by the life in the trenches. The content gunfire caused soldiers to develop a mental illness known as ââ¬Å"shell shockâ⬠* They could develop trench foot which was the rotting and swelling of flesh| Women and World War One| * Men that left for the war, left families and jobs behind * Women took the jobs of the men because they needed to provide for a family * Other women were war nurses| * Without the women urging the war years, the factory industry would have died. Sparked the feminist movement * Women thrived in fields such as journalism, social work and nutrition| * A short term cause of world war one included Archduke Franz Ferdinandââ¬â¢s trip to Sarajevo * Britain, France, Canada and Russia were all members of the triple entente * Contributing factors to the failure of the schlieffen plan are Russia mobilized more swiftly than expected, the British sent their army to France to defend the channel ports, the Belgian forces put up much strong resistance than expected, and the French were able to gather reinforcements in the time to prevent Paris from falling * In 1914, many people felt that the great war would all be over by Christmas * Both sides on the western front built trenches to protect themselves from attack, to prepare for counterattack, to provide safe communications for supply lines, and to prevent being outmanoeuvred by the enemy * Most Canadians were happy to be involved with WW1 because many Canadians had been born in Britain or were British descent * Dreadnoughts was not a technological advance that caused horrific causalities * The only important naval battle of world war one was the battle of Jutland * Lord Kitchener was an important British general * Income tax was introduced by prime minister burdens government as a temporary measure to help pay for the hu ge costs of war * The Zimmerman telegram, the sinking of the Lusitania in 1915,and German unrestricted submarine warfare were all reasons for the USA joining the war in 1917 * Mata Hari was a double agent in WW1 for Germany and French * The Treaty of Versailles was signed in 1919 One of the clauses of the treaty of Versailles mention reparations which was a means of payment for land destruction * A positive outcome of the technology developed during the great war was the use of gas to kill unwanted predatory animals * Poland, Yugoslavia, Czechoslovakia and irag were countries made by the treaty of Versailles * The Canadian government delayed the return of their soldiers until spring 1919 because of the winter weather, Canadians troops helped to occupy parts of Germany, and limited number of ships at the time. * After war measures included income tax, department of health and pensions for the returning soldiers Unit Two: Canada and the 1920ââ¬â¢s + 1930ââ¬â¢s Term | Definition| Significance| Flapper| A young fashionable women| * Brought new styles (bob haircuts, above the knee dresses) * They pushed the boundaries by staying out late , smoking and swearing. These women helped with the feminism movement during this time| Group of seven| A group of Canadian painters| * Inspired later Canadian artists such as Emily Carr * These artists painted Canadian Landscape, and now ar e very famous now, to own a painting is to own a part of Canadian history| Roaring Twenties| A time of prosperity for Canada | * Feminism movement allowed women to vote and led to later movements in the 1960s * Music, dances and slang words led to the quick development of agriculture * Everyone was niave in a sense that they believed the amazing prosperity of the twenties could last forever, it all came to a crashing end when the great depression began in the late 1920s| Prohibition| The ban of alcohol in a certain country or city.
Sunday, September 15, 2019
Are Humans Innately Evil or Good? Essay
Humans are a very fascinating species. We have been ruling the Earth for quite a while now. This is because we brood over all our necessities, skills and looks. The question of if we are innately evil or good has been asked by numerous people since civilization. Everyone has had different opinions. Two famous philosophers by the names of Thomas Hobbes and John Locke have been known to answer this question in a brief and direct way. Thomas Hobbes and John Locke have lived between the years of 1500-1700ââ¬â¢s in Europe. Locke was an English philosopher, political theorist, and found of Empiricism. They both have clashing and different opinions, but in my opinion I would have to agree with John Locke. Locke was born on August 29, 1632 in Wrington, England. He died on October 28, 1704. He was best known as an English philosopher and the author of Essay Concerning Human Understanding. Every human being is born good, they have a clean record, and they donââ¬â¢t know anything. Originally we were all in a state of nature. Parents, friends, relatives, societies, and the community influence us to do what they do. As we tend to grow up we will see murdering, stealing, taking drugs, and fighting all around us. Things like money and material possessions create jealousy and greed. Even if people are naturally good, the fact that some people have more than others creates problems. For example if one person is more rich than the other, the other person may at one point get jealous, and may perhaps do some unscrupulous things to the person, like steal from them, hate on them etc. We never knew about any of the bad things in the world, and neither did our ancestors. They were never natural instinctive traits. I think that Locke believed that humans are innately good because he probably grew up in a good neighborhood and had a good experience growing up. If one grows up in a very beautiful, safe, and well-mannered community and family, obviously they will do what their surrounding do, which is to do good. On the other hand, if one grows up to live in an incapacitated family and environment, he will tend to become evil, they will first watch and then they will mimic those same traits. Even though they do all of this, we humans will still have our conscience to tell us that what we are about to do is stupid or immature and we will regret it later on. Why would we bother setting up cities, going about helping others, reviewing where planet earth sits in its ability to survive if he didnââ¬â¢t want these things to do well? Sure there are people round that make it bad for all the others of us trying to do good, but weigh it up and youââ¬â¢ll see that only a small percentage of people are out to pull the curtain down on everyone else. If us humans were born evil, then why when we do the bad things that we do in life still feel the guilt and regret for it afterwards? Obviously the answer to this is because we arenââ¬â¢t evil; we just get influenced to become evil. In conclusion every single human was born good and even if they do get influenced to become evil they will still have all the regret, conscience, guilt, repentance, and shame on their shoulders to carry.
Subscribe to:
Posts (Atom)